Canon Super G3 FAX Board-AP1 Service Manual Download Page 56

Page: 56 / 58

Installation

6-6

Installation > Installation Procedure

5) Cut off the blindfold plates of the Left Rear Cover as shown using side cutter.

NOTE:

Check that there is no burr on the aperture after cutting.

6) Return the removed covers to their original positions.

NOTE:

As for the 2nd Line FAX Board-AP1, it is good to install it prior to restoring the external

covers of the host machine.

•  Controller Cover
•  Left Rear Cover (2 Claws, 4 Screws; RS-tight)
•  Rear Cover (4 Claws, 4 Screws; TP)

F-6-12

■

Procedure after Work

1) Affix the Modular Label.

Modular Label

2) Connect the Telephone Cord (6 contacts) to the PTT Plug matched the field or area.

NOTE:

• This step is only for Europe model. It describes a plug for France as an example.

• Do not connect the Telephone Cord (2 contacts) with the PTT Plug.

F-6-13

F-6-14

Summary of Contents for Super G3 FAX Board-AP1



























































Search results

Summary of Contents for Super G3 FAX Board-AP1

Reviews:

Related manuals for Super G3 FAX Board-AP1

Brands by name

Popular brands

Canon Super G3 FAX Board-AP1, Service Manual

Search results

Summary of Contents for Super G3 FAX Board-AP1

Reviews:

Related manuals for Super G3 FAX Board-AP1

Brands by name

Popular brands