Canon Super G3 FAX Board-AP1, Service Manual

Page: 39 / 58

5
5
Service Mode
Service Mode
5-18
5-18
Service Mode > IPFAX Setting > IPFAX > T.38 Setting of Bit
Service Mode > IPFAX Setting > IPFAX > T.38 Setting of Bit
Setting of Numeric Parameter (NUMERIC Param.)
<1/4> <NUM> <READY>
Report Sssw Menu Num Ncu Type IPFAX Print Clear Test
OK
001
002
003
004
005
006
007
008
xxxxx
xxxxx
xxxxx
xxxxx
xxxxx
xxxxx
xxxxx
xxxxx
←
（
yyyyy
）
{aaaaa
～
bbbbb}
←
（
yyyyy
）
{aaaaa
～
bbbbb}
←
（
yyyyy
）
{aaaaa
～
bbbbb}
←
（
yyyyy
）
{aaaaa
～
bbbbb}
←
（
yyyyy
）
{aaaaa
～
bbbbb}
←
（
yyyyy
）
{aaaaa
～
bbbbb}
←
（
yyyyy
）
{aaaaa
～
bbbbb}
←
（
yyyyy
）
{aaaaa
～
bbbbb}
■
Numerical Parameter Composition
No. Function Setting range Initial setting Unit
01 Missing areas of printing image when receiving
image with longer length than standard
0 to 9999 12 1 mm
04 Leading edge blank area 0 to 9999 3 1 mm
05 Trailing edge blank area 0 to 9999 3 1 mm
<001: printing upon reception of extra-length image>
Use it to set the range of the image to be removed from when printing an extra-length
received image.
Lower the parameter to decrease the range if the trailing edge of the received image must be
retained (as when it is longer than the effective recording length).
<004: leading edge margin>
Use it to set the leading-edge margin for the effective recording length.
<005: trailing edge margin>
Use it to set the trailing-edge margin for the effective recording length.
F-5-13
T-5-23
IPFAX Setting
IPFAX
■ NETC NUM
Bit Function Setting range
1 SW for adjusting the speed at VoIPGW
transmission [%]
0-9999*
However, the value is fixed in the case
of ECM, and is corrected by adding 5%.
2 VoIPGW buffer size [byte] 0-9999*
However, when the value is 0, it is
internally interpreted as 200.
4 Number of VoIPGW buffer reset frames at ECM
* At ECM transmission, when frames of the
number of this NUM value have been transmitted,
the next frames will be transmitted after the
VoIPGW buffer becomes empty.
0-9999*
However, when the value is 0, it is
internally interpreted as 16.
■ T.38 Setting of Bit
● SW01
Bit Function Setting range
2 T.38 significant bit of DIS (bit123) is ignored.
(When this SW is effective, the other party's machine is
regarded as IPFAX even if DIS bit123 is 0.)
Ignore Not ignore
3 Transmission ECM = OFF setting Effective Invalid *
4 Reception ECM = OFF setting Effective Invalid *
T-5-24
T-5-25