Canon Super G3 FAX Board-AP1, Service Manual

Page: 29 / 58

5
5
Service Mode
Service Mode
5-8
5-8
Service Mode > Setting of Bit Switch (SSSW) > Bit Switch Composition > SSSW-SW05
Service Mode > Setting of Bit Switch (SSSW) > Bit Switch Composition > SSSW-SW05
■ SSSW-SW05
● Functional Construction
Bit Function 1 0
0 not used - -
1 Conversion from mm to inch (text mode) convert do not convert
2 Conversion from mm to inch (text/photo mode) convert do not convert
3 end DIS signal bits 33 and over prohibit do not prohibit
4 Recording paper length availability declared in DIS signal A4/B4 size any size
5 not used - -
6 not used - -
7 not used - -
Detailed Discussions of Bit 1
Use it to enable/disable millimeter/inch conversion in sub scanning direction for images read
in text mode.
Detailed Discussions of Bit 2
Use it to enable/disable millimeter/inch conversion in sub scanning direction for images read
in text/photo mode while bit 1 is set to '1'.
Detailed Discussions of Bit 3
Use it to enable/disable transmission of bit 33 and thereafter (DIS signal).
Caution:
If 'prohibit' is selected, the Super Fine reception function or Memory Box function cannot
be used for communications from non-Canon machines.
Detailed Discussions of Bit 4
Use it to enable/disable declaration of the use of cut sheets (DIS signal).
For reception of an extra-long original, select 'A4/B4 size' if division is to be by the other party.
MEMO:
Some machines are not designed to divide extra-long originals.
T-5-6