Canon Super G3 FAX Board-AP1, Service Manual

Page: 44 / 58

5
5
Service Mode
Service Mode
5-23
5-23
Service Mode > Test Mode (TEST) > Function Test > 4800-bps Signal Transmission Test
Service Mode > Test Mode (TEST) > Function Test > 4800-bps Signal Transmission Test
■ V.34 G3 Signal Transmission Test (V34G3Tx)
Select the transmission speed you want to test, and then select a modulation speed (baud
rate); in response, the V.34 G3 transmission signal will be transmitted to the telephone line
terminal and the speaker. To stop the operation and to end test mode, press the key.
<1/1> <READY>
Report Sssw Menu Num Ncu Type IPFAX Print Clear Test
<V34G3TX> <MODEM>
OK
SPEED 33600bps
3429baud
3200baud
3000baud
2800baud
2743baud
2400baud
Using Text Mode
1) Select 'SPEED', and then select the speed you want to test using the Up/Down key.
2) Select the baud rate you want to test.
F-5-20
Function Test
■ 4800-bps Signal Transmission Test
The DC circuit will be closed, and a 4800-bps signal will be transmitted using the 4800-bps
signal transmission function of the modem. You can also monitor the transmission signal by
listening to the speaker. To stop the operation and end test mode, press the key.
<READY> <1/1>
Report Sssw Menu Num Ncu Type IPFAX Print Clear Test
<FACULTY> <G34800TX>
OK
G34800TX
F-5-21