Canon Staple Finisher-AA1, Service Manual

Page: 109 / 228

12. Remove the swing unit [1] from hook [2].
• 2screws [3]
[3]
[3]
[2]
[1]
[2]
2x
13. Remove the link shaft[2] of rear end guide [1].
[1]
[1]
[2]
[2]
14. Avoid three shaft [1], and remove the swing unit [2].
[1] [1]
[1]
[2]
15. Remove the 2 clips [1] and the 2 rear end guides [2]
from the swing unit [1].
[2]
[3]
[3]
[2]
[1]
■ Handling after replacement
1. When removed the swing unit, phase alignment
installing the swing unit.
“Phase Alignment When Installing the Swing Unit” on
page 173
2. When removed the swing unit, perform paddle
phase adjustment.
“Phase adjustment of paddle unit” on page 174
4. Parts Replacement and Cleaning
101