Canon RM-25 Administrator'S Manual Download Page 20

Page: 20 / 138

This software records images from cameras using an IP network, such as a LAN.

Configuration Example 1: Storage Server and Viewer Installed on One Computer

This example shows the simplest system configuration, where the Storage Server and Viewer are installed on one computer.

Images from the cameras are displayed or recorded using the same computer.

System Configuration Example

Important

• The load on the Storage Server may increase depending on the number of cameras connected and the recording settings. See

“Determining the Capacity of the Storage Server” (p. 22) to consider your configuration.

• Accessing one camera or Storage Server from many Viewers at the same time may affect system performance.

• Regularly check that the time setting is correct on the computers that are running the Storage Server and the Viewer. Also, before

changing the time setting on the computers, be sure to first stop the Storage Server and Viewer.

torage

erver Group

Network

Images from the cameras

torage

erver/Viewer

Summary of Contents for RM-25











































































































































Search results

Summary of Contents for RM-25

Reviews:

Related manuals for RM-25

Brands by name

Popular brands

Canon RM-25, Administrator'S Manual

Search results

Summary of Contents for RM-25

Reviews:

Related manuals for RM-25

Brands by name

Popular brands