Canon PowerShop SX270 HS User Manual Download Page 198

Page: 198 / 198

198

1
2
3
4
5
6
7
8
9
10
11

Cover
Preliminary Notes

and Legal Information
Contents: Basic

Operations

Advanced Guide

Camera Basics
Using GPS

Function
Auto Mode/

Hybrid Auto Mode
Other Shooting

Modes

Tv, Av, and M

Mode
Playback Mode

Wi-Fi Functions

Setting Menu

Accessories

Appendix

Index

Basic Guide

P Mode

198

Canadian Radio Interference Regulations

CAN ICES-3 (B)/NMB-3 (B)
To ensure proper operation of this product, use of genuine Canon

accessories is recommended.

For CA, USA only

Included lithium battery contains Perchlorate Material - special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.

Trademark Acknowledgments

•

The SDXC logo is a trademark of SD-3C, LLC.

•

This device incorporates exFAT technology licensed from Microsoft.

•

HDMI, the HDMI logo and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC.

•

Wi-Fi

, Wi-Fi Alliance

, WPA™, WPA2™ and Wi-Fi Protected Setup™

are trademarks or registered trademarks of the Wi-Fi Alliance.

About MPEG-4 Licensing

This product is licensed under AT&T patents for the MPEG-4 standard

and may be used for encoding MPEG-4 compliant video and/or decoding

MPEG-4 compliant video that was encoded only (1) for a personal and

non-commercial purpose or (2) by a video provider licensed under the AT&T

patents to provide MPEG-4 compliant video.

No license is granted or implied for any other use for MPEG-4 standard.

Disclaimer

•

Reprinting, transmitting, or storing in a retrieval system any part of this

guide without the permission of Canon is prohibited.

•

Canon reserves the right to change the contents of this guide at any time

without prior notice.

•

Illustrations and screenshots in this guide may differ slightly from the

actual equipment.

•

The above items notwithstanding, Canon accepts no liability for damages

due to mistaken operation of the products.

SX280 HS

FCC/IC Notice

Model: PC1967 (including WLAN Module Model WM217, FCC ID: AZD217)

The available scientific evidence does not show that any health problems are

associated with using low power wireless devices. There is no proof, however, that

these low power wireless devices are absolutely safe. Low power Wireless devices

emit low levels of radio frequency energy (RF) in the microwave range while being

used. Whereas high levels of RF can produce health effects (by heating tissue),

exposure to low-level RF that does not produce heating effects causes no known

adverse health effects. Many studies of low-level RF exposures have not found any

biological effects. Some studies have suggested that some biological effects might

occur, but such findings have not been confirmed by additional research. This model

has been tested and found to comply with FCC/IC radiation exposure limits set forth

for an uncontrolled equipment and meets the FCC radio frequency (RF) Exposure

Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF)

Exposure rules.

This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt

RSS standard(s). Operation is subject to the following two conditions: (1) this device

may not cause interference, and (2) this device must accept any interference,

including interference that may cause undesired operation of this device.

This transmitter must not be co-located or operated in conjunction with any other

antenna or transmitter.

COP

Summary of Contents for PowerShop SX270 HS







































































































































































































Search results

Summary of Contents for PowerShop SX270 HS

Reviews:

Related manuals for PowerShop SX270 HS

Brands by name

Popular brands

Canon PowerShop SX270 HS, User Manual

Search results

Summary of Contents for PowerShop SX270 HS

Reviews:

Related manuals for PowerShop SX270 HS

Brands by name

Popular brands