Canon Pixma TR7600 Series Online Manual Download Page 47

Page: 47 / 563

Connecting with Wireless Direct

You can connect devices (e.g. computer, smartphone, or tablet) to the printer by two methods below.

• Wireless connection (connecting devices via a wireless router)

• Direct wireless connection (connecting devices directly without a wireless router)

This section describes Wireless Direct, which allows you to print by connecting the devices to the printer
directly.

Follow the procedure below to set up and use Wireless Direct.

1. Preparing the printer.

Changing Printer Setting to Use Wireless Direct

2. Preparing a device to connect to the printer.

Connecting a smartphone/tablet/computer to the printer

Important

• You can connect up to 5 devices to the printer at the same time with Wireless Direct.

• Check the usage restrictions and switch the printer to the Wireless Direct.

Restrictions

Changing Printer Setting to Use Wireless Direct

Make sure the printer is turned on.

Select

(Setup) on HOME screen and then select

Device settings

Select

LAN settings

Select

Wireless Direct

Select

Enable/disable Wireless Direct

Check displayed message and then select

The Wireless Direct is enabled and a device can be connected to the printer wirelessly.

Note

• The password is required when connecting a device to the printer. Depending on the device you

are using, no password is required.

• When you connect a Wi-Fi Direct compatible device to the printer, select the device name from

your device.

• To change the identifier (SSID) and the password, see below.

Summary of Contents for Pixma TR7600 Series




















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Pixma TR7600 Series

Reviews:

Related manuals for Pixma TR7600 Series

Brands by name

Popular brands

Canon Pixma TR7600 Series, Online Manual

Search results

Summary of Contents for Pixma TR7600 Series

Reviews:

Related manuals for Pixma TR7600 Series

Brands by name

Popular brands