80
Chapter 6
Printing Photographs from a Wireless Communication Device
(1)
Oppose the infrared port of the mobile phone (D) to that of the machine (B) at a distance
of less than 7.87" / 20 cm (C).
(2)
Select the photo to print and send the data to the machine using the infrared
communication function of the mobile phone.
Printing will start after receiving all data.
Note
z
The effective angle of the IrDA port of the machine is about 10° from
the central axis in both vertical and horizontal directions (A).
z
The allowable distance of communication with the machine depends
on the mobile phone you use. For this distance, refer to your mobile
phone manual.
Note
z
To perform printing correctly from a mobile phone through infrared
communication, the following conditions should be satisfied.
– Compatible devices: The mobile phones with an IrDA port,
compatible image data transmitting through Infrared communication
– Printable data: Shooting image with the camera of the mobile phone
z
For the procedure to print from your mobile phone, refer to your mobile
phone manual.
z
Do not place any obstacle between the infrared ports of the machine
and mobile phone. Data cannot be transmitted between them.
z
During printing, be careful not to interrupt infrared communication with
the machine. If it is interrupted, send the data from the mobile phone
again.
z
Depending on your device, the Fine print quality option may not be
available due to the restriction on the infrared transfer capacity.
z
We recommend printing on sticker or credit card sized paper when the
print quality on other types of paper is not fine.
About transmittable data
z
It does not support printing a downloaded content or photo and a
photo attached to an E-mail for security reason.
z
It does not support printing video files.
z
Depending on the size of a photo, it may take a while for this machine
to start to print after starting the infrared transfer.
z
Depending on your device, it may not print data stored in a memory
card.
z
It automatically sets the photo quality and orientation (horizontal or
landscape) according to the photo size.
z
It automatically sets to the margin according to the photo size.
(B)
(A)
(D)
(C)
