manualshive.com logo in svg

Canon PIXMA MP950, User Manual

Share
Download
Canon PIXMA MP950 User Manual Download Page 19

Chapter 1 

17

Before Printing

Turning the Machine ON and OFF

Turn on the machine before starting printing.

„

Turning on the Machine

Before turning on the machine, confirm that the Print Head and ink tanks are set into place.

1

Open the Operation Panel, then press [ON/OFF].

The Power Lamp flashes green for a while, and then turns on.

„

Turning off the Machine

1

To turn off the machine, press [ON/OFF].

The machine is off when the Power Lamp stops flashing and all Operation Panel lamps are 
off.

„

Setting the Power Save Mode

The machine enters Power save mode if not operated for a certain interval. In the Power save 
mode, the internal fluorescent lamp are turned off, and the selected Mode Lamp and the 
Power Lamp stay lit. You can configure the interval that the machine waits before entering 
Power save mode. See 

“Power save setting” on page 95

.

When you try to copy or scan, the machine will exit from Power save mode.

If you use the machine frequently, we recommend that you set the Power save transfer time 
to 1 hour or 8 hours.

„

The Screen-saver Mode

The LCD goes out if the machine is not operated for 5 minutes. Press any button to restore 
the display. You cannot change the period before the LCD goes out.

Note

If preparatory operations above are not yet finished, follow the 

Easy 

Setup Instructions

 to complete them.

Note

If the Alarm Lamp lights or flashes orange and an error message is 
displayed on the LCD, see 

“An Error Message is Displayed on the LCD” 

on page 115

.

Important

When removing the power plug after turning off the machine, be sure to 
check that all the lamps on the Operation Panel are not lit. If the power 
plug is removed from the wall outlet with the lamps on the Operation 
Panel lit or blinking, the machine cannot protect its Print Head and may 
be unable to print.

See

“Keeping the Best Printing Results” on page 101

.

Summary of Contents for PIXMA MP950









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands