manualshive.com logo in svg

Canon PIXMA MP950, User Manual

Share
Download
Canon PIXMA MP950 User Manual Download Page 151

Chapter 13 

149

Appendix

(2)

Double-click the [Canon Utilities] folder, and then the [IJ Manual] folder.

(3)

Drag the [MP950] folder into the trash.

(4)

Drag the [MP950 On-screen Manual] on your desktop into the trash.

Transporting Machine

When relocating the machine or storing the machine for a long period of time, pack the machine 
using the original packing materials. If you do not have the original packing materials, pack the 
machine carefully using protective material and place inside a sturdy box.

Specifications

Caution

Do not transport or store the machine on a slant, vertically or upside-
down, as the ink may leak from the machine and cause damage to it.

Important

z

Make sure to lock the Scanning Unit (Printer Cover) by sliding the 
Scanner Lock Switch to the Lock position 

.

z

Pack the machine with the Print Head and ink tanks left installed.

Note

Before shipping the machine by special delivery or post, clearly label the 
box as “FRAGILE” or “HANDLE WITH CARE.”

General Specifications

Printing resolution

9600 * x 2400 dpi. max.

* Ink droplets can be placed with a pitch of 1/9600 inch at minimum.

Print speed *

*Based on Canon standard 
pattern.
Print speed may vary 
depending on system 
configuration, software, 
document complexity, print 
mode and page coverage.

Black printing (text pattern)

Max Speed (Custom Setting 5): 29 ppm

Standard: 15 ppm

Color printing 

Max Speed (Custom Setting 5): 22 ppm

Standard: 9.8 ppm

Print width

203.2 mm max. (8.0 inches)

(for Borderless Printing: 216 mm / 8.5 inches)

Resident print control 
mode

Canon extended mode

Receive buffer

42 KB

Interface

USB 2.0 Hi-Speed / Direct Print Port

* All operations are not guaranteed for computers standard-equipped with a 
USB 2.0 Hi-Speed interface.

* Since the USB 2.0 Hi-Speed interface is fully upwardly compatible with USB 
Full-Speed (USB 1.1), it can be used at USB Full-Speed (USB 1.1).

Direct Print Port

IrDA (Image data only)

Bluetooth (optional)

Acoustic noise level

Approx. 34.1 dB (A) (in the highest print quality mode)

Summary of Contents for PIXMA MP950









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands