manualshive.com logo in svg

Canon PIXMA MP950, User Manual

Share
Download
Canon PIXMA MP950 User Manual Download Page 142

140

Chapter 12

Troubleshooting

„

Trouble scanning with MP Navigator

„

Image position and size incorrect when scanning from the machine’s 
operation panel

Cannot Scan Films

„

Thumbnail Display does not display correctly after previewing

Scanned image won’t open.

The file name extension is not supported by the application software. 
Rescan the image using an application software, such as ArcSoft 
PhotoStudio, and change the file name extension when saving the image. 
Refer to the on-screen manual for each application software for the 
detailed procedures.

Cause

Action

The original may not be scanned 
correctly when [Document Size] is 
set to [Auto Detect].

Set the [Document Size] to the actual size of the original, and scan it 
again. If the size you need cannot be set, scan to a larger size and trim it. 
For more information, refer to the 

Scan Guide

.

Cause

Action

MP Navigator settings do not match 
the originals.

Set the MP Navigator [Document Type] and [Document Size] to match 
those of the originals being scanned. For more information, refer to the 

Scan Guide

.

Cause

Action

ScanGear MP and MP Navigator 
settings are not set for scanning 
film.

z

When scanning in the Simple Mode in ScanGear MP, select [Negative 
Film (Color)] or [Positive Film (Color)] in the [Select Source] category.

z

When scanning in the Advanced Mode in ScanGear MP, select [Color 
Negative Film], [Color Positive Film], [Monochrome Negative Film], 
[Monochrome Positive Film] in the [Select Source] category.

z

When scanning on the MP Navigator, scan using [Scan Film].

Resolution setting is too high and 
scanning is slow.

If the Output Resolution is set to too high, scanning takes a long time or 
the computer seems to be freezing. If this happens, lower the Output 
Resolution and rescan.

Cause

Action

You are attempting to scan film with 
extremely dark or bright contents./
The spaces between frames are 
extremely narrow (0.08" / 2 mm is 
standard).

If thumbnails are not displayed properly after previewing with ScanGear 
MP, scan in the Advanced Mode. For more information, refer to the 

Scan

Guide

.

Cause

Action

Summary of Contents for PIXMA MP950









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands