manualshive.com logo in svg

Canon PIXMA MP950, User Manual

Share
Download
Canon PIXMA MP950 User Manual Download Page 139

Chapter 12 

137

Troubleshooting

„

Cannot display preview

„

Computer stops operating during scanning

„

Scan quality is poor (Poor image displayed on the monitor)

An error message appears and the 
ScanGear MP window fails to 
appear.

z

Reattaching the USB cable. Be sure to use a certified USB 2.0 Hi-Speed 
cable. You are recommended to use the cable no longer than 9.8 feet (3 
meters).

z

If a USB hub is used for the connection, do not use it. Attach the cable 
to a USB port on the computer itself (not the hub).

z

Attach the USB cable to a different USB port on the computer itself (not 
a hub). 

z

Set the Setup CD-ROM and install the software.

z

Select this machine in [Select Source] or [Import] in your application 
software.

z

Make sure that your application software supports TWAIN. You cannot 
start ScanGear MP from within an applilcation software that does not 
support TWAIN.

Cause

Action

An error message “Release the lock 
switch” appears and the machine 
fails to preview.

Close the application softwares, disconnect the USB interface cable from 
the scanner and set the Scanner Lock Switch to the release position. Then 
reconnect the USB interface cable to the computer. For details on 
releasing the Scanner lock, refer to the 

Easy Setup Instructions

.

Cause

Action

Output resolution set too high.

Reboot the computer, lower the output resolution and rescan.

The hard disk does not have enough 
available space.

z

Reset and reboot the computer, delete unnecessary files and 
application software, and rescan. 

z

Open ScanGear MP from within the application software, click the 
[Preferences] button in the Advanced Mode, and change the folder 
listed in the [Select Folder Where Temporary Files are Saved] category 
to one on a disk with sufficient free space.

Multiple devices connected to the 
USB port.

Disconnect all other devices but the machine from the port.

Cause

Action

The resolution is low.

If the image looks grainy, increase the scan resolution.

For details, refer to the 

Scan Guide

.

Specification of the application 
software.

Some application software does not display the image clearly if the image 
is too small. Set the view mode to 100%.

Moiré appears.

Set [Descreen] to [ON] in the [Image Settings] section of the Advanced 
Mode of ScanGear MP.

Note

Moiré may appear when you scan digital photo prints.

Cause

Action

Summary of Contents for PIXMA MP950









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands