Canon PIXMA MP530 Service Manual Download Page 89

Page: 89 / 91

<Direct printing>

Camera Direct
Printing (PictBridge)

Supported paper size

- Default (selections based on the printer settings)

- 10 x 15 cm / 4" x 6"

Photo Paper Pro, Photo Paper Plus Glossy, Photo Paper Plus Semi-gloss,
Glossy Photo Paper, Photo Stickers

- 13 x 18 cm / 5" x 7"

Photo Paper Plus Glossy*3

- A4 / LTR

Photo Paper Pro, Photo Paper Plus Glossy, Photo Paper Plus Semi-gloss,
Glossy Photo Paper, Glossy Photo Paper "Everyday Use", plain paper

- 5.4 x 8.6 cm / Credit Card

Glossy Photo Paper

*2: Canon-brand sticker. Printing on Photo Stickers is available only when the

Layout function on the camera has a 16-up option.

*3: Available only with a Canon PictBridge camera.

Supported paper type

- Default (selections based on the printer settings)

- Photo: Photo Paper Plus Glossy, Photo Paper Plus Semi-gloss, Glossy Photo
Paper,

Glossy Photo Paper "Everyday Use", Photo Stickers

- Fast Photo: Photo Paper Pro

- Plain paper: only A4 / LTR plain paper

Print layout

- Default (Selections based on the machine setting), Borderless, Bordered, N-up (2,
4, 9, 16

)

Layout compatible with Canon-brand sticker above.

Trimming

- Default: OFF (no trimming)
- ON (follows the camera settings) / OFF

Image optimization

- Default (Selections based on the machine setting), On, Off, "VIVID"

"NR"(Noise Reduction)

, "VIVID+NR"

, "Face"

Available only with a Canon PictBridge camera.

Information print

Default (Off: No printing), Date, File No., Both, Off

Throughput

Approx. 77 sec., with the following conditions and settings:

- A photo from a 5 mega-pixel digital camera

- 4" x 6" borderless

- Photo Paper Plus Glossy

- Standard print quality

- Process from pressing the printing start button to ejecting paper

Camera Direct
Printing (Canon
Bubble Jet Direct)

Supported paper

- Card #1 (4" x 6" / 101.6 x 152.4 mm)

Photo Paper Pro

- Card #2 (4" x 6" / 101.6 x 152.4 mm)

Photo Paper Plus Glossy, Photo Paper Plus Semi-gloss, Glossy Photo Paper,

Glossy Photo Paper "Everyday Use"

- Card #3 (5" x 7" / 127.0 x 177.8 mm)

Photo Paper Plus Glossy

- A4 / LTR

Photo Paper Pro, Photo Paper Plus Glossy, Photo Paper Plus Semi-gloss, Glossy
Photo Paper,

Glossy Photo Paper "Everyday Use"(A4 only)

Print layout

Standard: Borderless/with border

Effect

Exif print

DPOF print

Ver. 1.00 compatible
(number of copies, select images, print special characters (date))

3-16

Summary of Contents for PIXMA MP530




























































































Search results

Summary of Contents for PIXMA MP530

Reviews:

Canon PIXMA MP530, Service Manual, Page: 89 / 91

Search results

Summary of Contents for PIXMA MP530

Reviews: