Canon PIXMA MP530, Service Manual, Page: 10 / 91

2. LIST OF ERROR DISPLAY / INDICATION
Errors and warnings are displayed by the following ways:
1) Operator call errors are indicated by the Alarm LED lit in orange, and the error and its solution are displayed on the LCD in text.
2) Warnings during printing from a computer are displayed on the printer driver Status Monitor.
3) Error codes are printed in the "operator call/service call error record" area in EEPROM information print.
Buttons valid when an operator call error occurs:
1) ON/OFF button: To turn the machine off and on again.
2) OK button: To clear and recover from an error. In some operator call errors, the error will automatically be cleared when the
cause of the error is eliminated, and pressing the OK button may not be necessary.
3) Stop/Reset button: To cancel the job at error occurrence, and to clear the error.
2-1. Operator Call Errors (by Alarm LED Lit in Orange)
Error
Error code Message on the LCD
Solution
No paper (ASF). [1000]
LOAD PAPER
SET PAPER AND
PRESS [OK]
Set the paper in the ASF, and press the OK button.
No CD / DVD tray
*1
. [1001]
CD-R TRAY IS NOT
SET
Set the CD / DVD tray, and press the OK button.
No paper in the front
paper feed cassette.
[1003]
LOAD PAPER
SET PAPER AND
PRESS [OK]
Set the paper in the cassette, and press the OK button.
No CD or DVD
*1
. [1002] NO DVD/CD IS SET
Set a CD or DVD in the CD / DVD tray (which is ejected at
error occurrence), and inset the CD / DVD tray in the proper
position. Then, press the OK button.
Paper jam. [1300] PAPER JAMMED
Remove the jammed paper, and press the OK button.
Paper jam in the rear
guide.
[1303]
Paper jam in the under
guide.
[1304]
No ink.
[1601],
[1602]
[1611],
[1612][1613]
CHECK INK
U041
Replace the empty ink tank(s), and close the cover.
Pressing the OK button will clear the error without ink tank
replacement, however, ink may run out during printing.
Note:
[1601]: Pigment BK
[1602]: Dye BK
[1611]: Dye Yellow
[1612]: Dye Magenta
[1613]: Dye Cyan
Ink tank not installed.
Ink tank may not be
compatible.
[1660] CHECK INK
U043
Possible causes are as follows:
- The ink tank may not be installed properly (The lamp on the
ink tank is off). Install the ink tank appropriately.
- The ink tank may not be compatible with this machine (The
lamp on the ink tank is off). Install the appropriate ink tank.
The print head is not
installed, or it is not
properly installed.
Head contact is faulty.
[1401]
CHECK CARTRIDGE
U051
- Install the print head properly.
- Replace the print head.
1-5