
Note: - If the Stop/Reset button is pressed 16 or more times, the Alarm LED (orange) or COPY button (green) lights
steadily without any changes.
- At the end of the service mode, press the ON/OFF button. The paper lifting plate of the sheet feeder unit will be
raised.
<Destination settings procedures>
In the destination settings mode, press the Stop/Reset button the specified number of time(s) according to the destination listed
in the table below, and press the ON/OFF button.
Note: After setting the destination without logic board replacement, be sure to initialize the EEPROM. Without
EEPROM initialization, the destination settings may not be valid.
Confirm the model name and destination in service test print or EEPROM information print.
[See 3-4. Verification Items, (1) Service test print,
or (2) EEPROM information print.]
<Waste ink amount setting procedures>
Set the waste ink amount data to a replaced new EEPROM after the logic board is replaced in servicing.
1) Before replacement of the logic board ass'y, check the waste ink amount in EEPROM information print.
[See 3-4.
Verification Items, (2) EEPROM information print.]
2) In the waste ink amount setting mode, press the Stop/Reset button the specified number of time(s) according to the waste ink
absorber whose value should be transferred to the replaced new EEPROM. (Only the main waste ink absorber for the
MP530)
11 times
Orange (Alarm)
Button and LCD test
See "Button and LCD test procedures" below.
12 times
Green (COPY)
Return to the menu
selection
13 times
Orange (Alarm)
Return to the menu
selection
14 times
Green (COPY)
Left margin correction
Not used in servicing.
15 times
Orange (Alarm)
Waste ink amount setting
See "Waste ink amount setting procedures" below.
16 times or
more
Green at even
numbers (COPY)
Orange at odd
numbers (Alarm)
Return to the menu
selection
Time(s)
LED indication
Destination
CD / DVD print
0 times
Green (COPY)
No change of the destination
1 time
Orange (Alarm)
Japan
Supported
2 times
Green (COPY)
Korea
Not supported
3 times
Orange (Alarm)
US
Not supported
4 times
Green (COPY)
Europe
Supported
5 times
Orange (Alarm)
Australia
Supported
6 times
Green (COPY)
Asia
Supported
7 times
Orange (Alarm)
China
Supported
8 times
Green (COPY)
Taiwan
Supported
9 times or
more
Orange (Alarm)
Return to the menu selection
Time(s)
Waste ink absorber
Remarks
0 times
Main waste ink absorber
1-42
Summary of Contents for PIXMA MP530
