manualshive.com logo in svg

Canon PIXMA MG5600 Series, Online Manual

Share
Download
Canon PIXMA MG5600 Series Online Manual Download Page 724

The wireless channel to be used may be limited depending on wireless network devices installed in the
computer. Refer to the instruction manual provided with your computer or your wireless network device to
specify the valid wireless channel.

Check9

 Make sure that the channel confirmed in Check 8 can communicate with the

computer.

If not, change the channel set to the access point.

Check10

 Make sure that the firewall of the security software is disabled.

If the firewall function of your security software is turned on, a message may appear warning that Canon
software is attempting to access the network. If the warning message appears, set the security software to
always allow access.

If using any programs that switch the network environment, check their settings. Some programs will enable a
firewall by default.

Check11

 When using a router, connect the machine and computer to the LAN side

(same network segment).

If the problem is not resolved, perform setup with the Setup CD-ROM or perform it according to the
instructions on our website.

•

For placement:

Make sure that there is no barrier or obstacle between the access point and the machine.

Note

•

When you connect the machine to a Windows XP computer by cableless setup:

Follow the procedure below to perform settings of the machine and the computer.

1.

Enable the access point mode of the machine.

2. Right-click the 

Wireless Network Connections

 icon on the notification area on the desktop,

then click 

View Available Wireless Networks

.

3. Select the network name on the screen displayed, then click 

Connect

.

Select "XXXXXX-MGXXXXseries" ("XX" represents alphanumeric characters.) as the network
name.

4. Enter the network key on the screen displayed, then click 

Connect

.

As a default, the serial number of the machine is used as a network key. Confirm the serial
number on the rear of the machine.

5. Perform setup with the Setup CD-ROM or perform it according to the instructions on our website.

Cannot Communicate with the Machine Using the Access Point Mode

Check1

 Make sure that the machine is turned on.

Check2

 Is 

Change LAN

 in 

LAN settings

 under 

Device settings

 set to 

Disable LAN

or 

Wireless LAN active

?

Select 

Access point mode active

.

724

Summary of Contents for PIXMA MG5600 Series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands