Canon PIXMA MG5600 Series Online Manual Download Page 330

Page: 330 / 910

Precautions for Safe Transport of the Machine

When relocating the machine, make sure of the following.

Important

• Pack the machine in a sturdy box so that it is placed with its bottom facing down, using sufficient

protective material to ensure safe transport.

• With the print head and ink tank left installed in the machine, press the

button to turn off the power.

This allows the machine to automatically cap the print head, thus preventing it from drying.

• After packing, do not tilt the box containing the machine or turn it on its side or upside down. Doing so

may cause the ink to leak during transport and cause damage to the machine.

• When a shipping agent is handling transport of the machine, have its box marked "THIS SIDE UP" to

keep the machine with its bottom facing down. Mark also with "FRAGILE" or "HANDLE WITH CARE".

1. Turn the machine off.

2. Confirm that the

POWER

lamp is off and

unplug the power cord

Important

• Do not unplug the machine while the

POWER

lamp is lit or flashing, as it may cause malfunction

or damage to the machine, making the machine unable to print.

3. Retract the paper output support, then close the paper output tray.

4. Retract the output tray extension and the paper support, then close the front cover.

5. Unplug the printer cable from the computer and from the machine, then unplug the power

cord from the machine.

6. Use adhesive tape to secure all the covers on the machine to keep them from opening

during transportation. Then pack the machine in the plastic bag.

7. Attach the protective material to the machine when packing the machine in the box.

330

Summary of Contents for PIXMA MG5600 Series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA MG5600 Series

Reviews:

Brands by name

Popular brands

Canon PIXMA MG5600 Series, Online Manual

Search results

Summary of Contents for PIXMA MG5600 Series

Reviews:

Brands by name

Popular brands