manualshive.com logo in svg

Canon PIXMA MG5600 Series, Online Manual

Share
Download
Canon PIXMA MG5600 Series Online Manual Download Page 185

Maintenance Procedure

If print results are blurred, colors are not printed correctly, or print results are unsatisfactory (e.g. misaligned
printed ruled lines), perform the maintenance procedure below.

Important

• Do not rinse or wipe the print head and ink tank. This can cause trouble with the print head and ink

tank.

Note

• Make sure that the orange protective tape does not remain on the ink tank.

• Open the operation panel and make sure that the lamp on the ink tank is lit. If the lamp is flashing or off,

take appropriate action.

Checking the Ink Status with the Ink Lamps

• Increasing the print quality in the printer driver settings may improve the print result.

Changing the Print Quality and Correcting Image Data

When the Print Results Are Blurred or Uneven:

Step1

 Print the nozzle check pattern.

From the machine

Printing the Nozzle Check Pattern

From the computer

Use Your Computer to Print a Nozzle Check Pattern

Step2

 

Examine the nozzle check pattern

.

If there are missing lines or horizontal white streaks in the pattern:

Step3

 Clean the print head.

From the machine

Cleaning the Print Head

From the computer

185

Summary of Contents for PIXMA MG5600 Series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands