Canon PIXMA G4010 Series Online Manual Download Page 132

Page: 132 / 515

Inside View

(1) ink tank covers

Open to refill ink tanks.

(2) scanning unit / cover

Scans originals. Open to refill ink tanks or to remove jammed paper.

(3) ink tanks

The black ink tank is on the left, and the color ink tanks (cyan, magenta, and yellow) are on the right.

If any ink levels are low, refill the low tanks.

(4) cartridge holder

Install the cartridge here.

Note

• For details on refilling ink tanks, see

Refilling Ink Tanks

(5) Upper limit line

Indicates the maximum capacity of the ink.

(6) Single dot

Indicates the amount of ink required when performing ink flush.

(7) Lower limit line

Indicates the lower limit of the sufficient amount of ink to print. Refill the ink tank before the amount of
ink is below this line.

132

Summary of Contents for PIXMA G4010 Series




































































































































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA G4010 Series

Reviews:

Related manuals for PIXMA G4010 Series

Brands by name

Popular brands

Canon PIXMA G4010 Series, Online Manual

Search results

Summary of Contents for PIXMA G4010 Series

Reviews:

Related manuals for PIXMA G4010 Series

Brands by name

Popular brands