Canon PIXMA G2060 Series Online Manual Download Page 208

Page: 208 / 271

•

When copying, see also the sections below:

Check6

Is platen glass dirty?

Clean the platen glass.

Cleaning Platen and Document Cover

Check7

Make sure original is properly loaded on platen.

When you load the original on the platen, load it with the side to be copied facing down.

Loading Originals

Check8

Is copy source a printed paper by printer?

If you use a printout done by this printer as the original, print quality may be reduced depending on the condition
of the original.

Reprint from the computer if you can reprint from it.

Note

• Although some air may enter the ink tube, it is not a malfunction. No problem if the nozzle check pattern

is printed correctly.

208

Summary of Contents for PIXMA G2060 Series
















































































































































































































































































Search results

Summary of Contents for PIXMA G2060 Series

Reviews:

Brands by name

Popular brands

Canon PIXMA G2060 Series, Online Manual

Search results

Summary of Contents for PIXMA G2060 Series

Reviews:

Brands by name

Popular brands