Canon PIXMA G2060 Series Online Manual Download Page 141

Page: 141 / 271

Quiet setting

Enables this function on the printer if you want to reduce the operating noise, such as when printing at night.

Follow the procedure below to perform setting.

Check that printer is turned on.

Press the

Setup

button.

The

Setup menu

screen is displayed.

Select

Quiet mode

and then press the

button.

Select

OFF

and press

button.

When

is selected, you can reduce the operating noise while printing is in progress.

Important

• When

is selected, operating speed may be reduced compared to when

OFF

is selected.

• This function may not be so effective depending on the printer's setting. Furthermore, certain

noise, such as when the printer is preparing for printing, is not reduced.

Note

• You can set the quiet mode from the operation panel of the printer, the printer driver, or ScanGear

(scanner driver). No matter how you set the quiet mode, the mode is applied when you perform
operations from the operation panel of the printer or printing and scanning from the computer.

141

Summary of Contents for PIXMA G2060 Series
















































































































































































































































































Search results

Summary of Contents for PIXMA G2060 Series

Reviews:

Brands by name

Popular brands

Canon PIXMA G2060 Series, Online Manual

Search results

Summary of Contents for PIXMA G2060 Series

Reviews:

Brands by name

Popular brands