Canon PIXMA G2060 Series Online Manual Download Page 174

Page: 174 / 271

Setting Items for Copying

You can change the copy settings such as the page size, media type, and intensity.

In the copy mode, press the

MENU

button, use the

button to select a setting item, then press the

button.

Use the

button to adjust each setting item, then press the

button. The next setting item is

displayed.

The LCD returns to the Copy standby screen when all the settings are complete.

Note

• The (asterisk) on the LCD indicates the current setting.

• Some settings cannot be specified in combination with the setting of other setting items or the copy

menu.

• The settings of the page size, media type, etc. are retained even if the printer is turned off.

•

Enlarge/Reduce

Select the reduction/enlargement method.

Reducing/Enlarging Copies

Ex:

Note

• This setting item is displayed under the following conditions.

When standard copying is selected

When

Borderless copy

is selected for

Special copy

•

Copy intensity

Change the intensity (brightness).

Ex:

Note

• If you select

Manual adjust

, use the

button to decrease the intensity or the

button to

increase it.

•

Page size

Select the page size of the loaded paper.

Ex:

174

Summary of Contents for PIXMA G2060 Series
















































































































































































































































































Search results

Summary of Contents for PIXMA G2060 Series

Reviews:

Brands by name

Popular brands

Canon PIXMA G2060 Series, Online Manual

Search results

Summary of Contents for PIXMA G2060 Series

Reviews:

Brands by name

Popular brands