Canon PIXMA G2060 Series Online Manual Download Page 162

Page: 162 / 271

Printing on Postcards

This section describes the procedure for printing on postcards.

Load postcards

in printer

Select paper size and paper type from the printer

Hagaki

for paper size from the printer operation panel.

Also, register

IJ Hagaki

Hagaki K

, or

Hagaki

for paper type, according to your purpose. When you print

on the address side, register

Hagaki

Select

Paper Size

and

Media Type

from the print dialog

Select

Postcard

Postcard Borderless

for

Paper Size

from the print dialog. When you print on the

address side, select

Postcard

Select

Hagaki

Hagaki (A)

Hagaki K

Hagaki K (A)

Ink Jet Hagaki

Ink Jet Hagaki (A)

, for

Media

Type

from the print dialog.

Important

• This printer cannot print on postcards that have photos or stickers attached.
• You will get cleaner printing if you print the message side first and then print the address side.

Click

Print

The printer prints according to the specified settings.

162

Summary of Contents for PIXMA G2060 Series
















































































































































































































































































Search results

Summary of Contents for PIXMA G2060 Series

Reviews:

Brands by name

Popular brands

Canon PIXMA G2060 Series, Online Manual

Search results

Summary of Contents for PIXMA G2060 Series

Reviews:

Brands by name

Popular brands