manualshive.com logo in svg

Canon PIXMA G2060 Series, Online Manual

Share
Download
Canon PIXMA G2060 Series Online Manual Download Page 117

Inside View

A: Scanning Unit / Cover

Scans originals. Open to refill ink tanks and to remove jammed paper.

B: Tank Cap

Open to refill ink tanks.

C: Ink Tanks

The black ink tank is on the left, and the color ink tanks (cyan, magenta, and yellow) are on the right.

If any ink levels are low, refill the low tanks.

Refilling Ink Tanks

D: Upper limit line

Indicates the maximum capacity of the ink.

E: Single dot

Indicates the amount of ink required when performing ink flush.

F: Lower limit line

Indicates the lower limit of the sufficient amount of ink to print. Refill the ink tank before the amount of
ink is below this line.

G: Ink Valve Lever

Operate when transporting a printer.

Transporting Your Printer

H: Print Head Holder

The print head is pre-installed.

117

Summary of Contents for PIXMA G2060 Series
















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands