manualshive.com logo in svg

Canon MF724Cdw, Service Manual

Share
Download
Canon MF724Cdw Service Manual Download Page 81

9. Enter service mode, and set the following item to "0".

• COPIER > OPTION > USER > SMD-EXPT

TNRB-SW 

: 0

SCALL-SW 

: 0

SCALLCMP  : 0

PC-MODE 

: 0

SMD-EXPT 

: 1

NOTE:

The [SMD-EXPT] setting can be specified either from the Control Panel or from the remote UI.

 List of Items Which Can Be Imported

The following shows the items to be imported for this model.
Note that the setting values are not imported in cases such as below:

• Items which are originally not included in a DCM file (e.g.:"Settings/Registration Basic Information" of a DCM file exported

using service mode)

• Not included in the import coverage (Cases A to C)
• There are no options and functions related to setting values

The import coverage shown in the table below is as shown below. Those that are not described here cannot be imported.

Import coverage

Description

Case A: The same machine

Import to the same machine (for backup and restoration, etc.)

Case B: The same model

Import to a different machine of the same model (the same series)

Case C: Different model

Import to a different machine of a different model (a different series)

■ Settings/Registration Basic Information

● Preferences

Setting Information

Case A

Case B

Case C

Volume Settings
Fax Volume

Yes

Yes

Yes

Ring Tone

Yes

Yes

Yes

TX Done Tone

Yes

Yes

Yes

RX Done Tone

Yes

Yes

Yes

Scanning Done Tone

Yes

Yes

Yes

Entry Tone

Yes

Yes

Yes

Invalid Entry Tone

Yes

Yes

Yes

Restock Supplies Tone

Yes

Yes

Yes

Warning Tone

Yes

Yes

Yes

Job Done Tone

Yes

Yes

Yes

Energy Saver Alert

Yes

Yes

Yes

Original in Feeder Detection Tone

Yes

Yes

Yes

Display Settings
Default Screen after Startup/Restoration

Yes

Yes

Yes

Language

Yes

Yes

Yes

2. Technical Explanation

73

Summary of Contents for MF724Cdw








































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands