Canon MB5100 Series Online Manual Download Page 241 | Manualshive

Page: 241 / 1150

background image

Safety Precautions

Choosing a location

• Do not install the printer in a location that is unstable or subject to excessive vibration.
• Do not install the printer in locations that are very humid or dusty, in direct sunlight, outdoors, or close

to a heating source.
To avoid the risk of fire or electric shocks, use the printer under the operating environment specified in
the

.

• Do not place the printer on a thick rug or carpet.
• Place the printer with its back in a location that is more than 2 inches (5 cm) away from the wall.

Power Supply

• Ensure that the area around the power outlet is kept clear at all times so you can easily unplug the

power cord if necessary.

• Never remove the plug by pulling on the cord.

Pulling the cord may damage the power cord, leading to possible fire or electrical shock.

• Do not use an extension lead/cord.

Working Around the Printer

• Never put your hands or fingers in the printer while it is printing.
• When moving the printer, carry the printer at both ends. In case the printer weighs more than 14 kg, it

is recommended to have two people lifting the printer. Accidental dropping of the printer causes injury.
For the printer's weight, refer to the

.

• Do not place any object on the printer. Especially do not place metal objects (paper clips, staples,

etc.) or containers of flammable solvents (alcohol, thinners, etc.) on top of the printer.

• Do not transport or use the printer on a slant, vertically or upside-down, as the ink may leak and

damage the printer.

• When loading a thick book on the Platen Glass, do not press hard on the Document Cover. The

Platen Glass may break and cause injury.

Print Heads/Ink Tanks/FINE Cartridges

• Keep ink tanks out of the reach of children. In case ink is accidentally licked or swallowed, rinse out

mouth or give one or two glasses of water to drink. If irritation or discomfort occurs, obtain medical
advice immediately.

• In case ink gets in contact with eyes, rinse with water immediately. In case ink gets in contact with

skin, wash with soap and water immediately. If irritation to eyes or skin persists, obtain medical advice
immediately.

• Never touch the electrical contacts on a print head or FINE cartridges after printing.

The metal parts may be very hot and could cause burns.

• Do not throw ink tanks and FINE cartridges into fire.
• Do not attempt to disassemble or modify the print head, ink tanks, and FINE cartridges.

241

«
...
239
240
241
242
243
...
»

Summary of Contents for MB5100 Series































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MB5100 Series

Brand: Oki Pages: 33

Brand: Oki Pages: 52

Brand: Oki Pages: 11

Brand: OKIDATA Pages: 58

Brand: QMS Pages: 160

Brand: QMS Pages: 110

Brand: QMS Pages: 158

Brand: CAB Pages: 144

PowerShot S330 Digital ELPH

Brand: Canon Pages: 2

PowerShot S400 Digital Elph

Brand: Canon Pages: 271

Brand: Canon Pages: 6

PowerShot S330 Digital ELPH

Brand: Canon Pages: 25

KXPX2M - HOME PHOTO PRINTER

Brand: Panasonic Pages: 28

Brand: Panasonic Pages: 78

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 9

Jetwriter KX-CL500

Brand: Panasonic Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands