Canon LBP710Cx User Manual Download Page 572

Page: 572 / 894

Replacing Toner Cartridges

0YSF-070

The machine will display a message when a toner cartridge is nearly empty. Note that the print quality becomes poor if

you continue printing without taking any action. You can check the amount remaining in the toner cartridge on the

display.

When a Message Appear(P. 566)
If Printouts are Poor in Quality(P. 567)
Checking the Amount Remaining in the Toner Cartridge(P. 567)

◼

When a Message Appear

Depending on which message is displayed, you will need to make sure that you have a replacement toner cartridge

ready or replace the toner cartridge. How to Replace Toner Cartridges(P. 569) Consumables(P. 625)

●

"X" in the following message represents a CMYK color.

This message notifies you that the toner cartridge for the indicated color needs to be replaced soon. Make sure

that you have a replacement toner cartridge ready. Replace the toner cartridge if you see this message before

you start to print a large job.

●

When the <Ready to print.> message is not displayed, the printing is temporarily stopped. To resume
the printing, press

(

●

Which message is to be displayed depends on the <Warning Step> setting in the setting menu of the
operation panel. Warning Step(P. 367)

●

You can set any value as the percentage of the amount remaining in the toner cartridge that triggers
this message. Spec Tnr Chk Timing(P. 435)

The toner cartridge for the indicated color has reached the end of its lifetime. It is recommended that you

replace this cartridge with a new one.

Maintenance

566

Summary of Contents for LBP710Cx































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LBP710Cx

Reviews:

Brands by name

Popular brands

Canon LBP710Cx, User Manual

Search results

Summary of Contents for LBP710Cx

Reviews:

Brands by name

Popular brands