manualshive.com logo in svg

Canon LBP710Cx, User Manual

Share
Download
Canon LBP710Cx User Manual Download Page 537

IE Check auth. settings

The IEEE802.1X authentication method differs between the machine and the authentication server.

●

Select the correct IEEE802.1X authentication method.

Configuring IEEE 802.1X Authentication(P. 312)

IE No reply from the destination.

An error has occurred during communication for IEEE802.1X authentication with the authentication

server.

●

Check whether the LAN cable is securely connected.

IE Set necessary authentication info.

The information specified for IEEE802.1X authentication is not sufficient.

●

Check the IEEE802.1X settings, and specify the settings properly.

Configuring IEEE 802.1X Authentication(P. 312)

IE Set the correct authentication info.

An error has been returned from the authentication server because the certificate to be used for

IEEE802.1X authentication is not specified or it is invalid.

●

The certificate to be used for TLS authentication is not specified or it is invalid. Check the certificate, and
specify the valid certificate.

Configuring IEEE 802.1X Authentication(P. 312)

●

If the certificate in the machine is valid, check the CA certificate of the authentication server.

The login name to be used for IEEE802.1X authentication is not specified.

●

The login name to be used for IEEE802.1X authentication is not specified. Specify the login name.

IE The certificate has expired.

The certificate received from the authentication server has been found to have expired during

IEEE802.1X authentication.

●

Check the certificate of the authentication server.

●

Check the time settings in the machine and authentication server.

Date/Time Settings(P. 370)

IE The certificate is incorrect.

An error has occurred as a result of verification of the certificate received from the authentication server

by using the CA certificate during IEEE802.1X authentication.

●

Check the certificate of the authentication server.

●

Install the CA certificate in the machine.

Using CA-issued Key Pairs and Digital Certificates(P. 329)

IEEE802.1X error. Set the necessary auth. information.

The information specified for IEEE802.1X authentication is not sufficient.

●

Check the IEEE802.1X settings, and specify the settings properly.

Troubleshooting

531

Summary of Contents for LBP710Cx































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands