Canon LBP710Cx User Manual Download Page 546

Page: 546 / 894

XPS print range error.

There is no page that can be processed in the specified print range.

●

Specify the correct range of print pages, and try printing the file again.

Printing from USB Memory (USB Direct Print)(P. 118)
Print Settings for Direct Print(P. 149)

●

When you press

(

), the print job is canceled.

XPS rendering error.

An error has occurred in the XPS rendering system.

●

Contact your local authorized Canon dealer.

XPS unsupported image error.

Unprintable images (HD Photo) are contained in the data.

●

Convert the image data in the XPS file to other data format, and try printing the file again.

●

You can press

(

) to continue printing. However, images with errors are not printed.

Y toner cartridge lifetime reached. Change recommended

The toner cartridge has reached the end of its lifetime.

●

Replacing the toner cartridge with a new one is recommended.

Replacing Toner Cartridges(P. 566)

●

You can continue printing when this message is displayed, but the print quality may deteriorate.

●

Receiving e-mail and fax documents will be disabled. Printing Received E-mail (E-Mail Print)
(P. 160)

Y toner cartridge will soon reach lifetime.

The replacement time for the toner cartridge is near.

●

Make sure that you have a replacement toner cartridge ready.

Consumables(P. 625)

●

Replace the toner cartridge if you see this message before you start to print a large job.

Replacing Toner Cartridges(P. 566)

●

When the printing is stopped, you can press

(

) to continue printing.

Troubleshooting

540

Summary of Contents for LBP710Cx































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LBP710Cx

Reviews:

Brands by name

Popular brands

Canon LBP710Cx, User Manual

Search results

Summary of Contents for LBP710Cx

Reviews:

Brands by name

Popular brands