manualshive.com logo in svg

Canon LBP710Cx, User Manual, Page: 160 / 894

Share
Download
Canon LBP710Cx User Manual Download Page 160

[TR Normal] 

Color matching is performed so that data is printed in colors close to the colors
displayed on the monitor and that bleeding of toner into text and fine lines is well
controlled.

[TR Photo] 

Color matching is performed so that the print result is similar to photography and that
bleeding of toner into text and fine lines is well controlled.

●

For XPS files, this item is available when [Matching Mode] is set to [ICC Profile].

[Matching Method] 

 

 

 

Specify which element to be given priority over others in color matching by [RGB Source Profile]. For XPS files,

you can set this item for each of image types contained in one document: [Text], [Graphics], and [Image].

[Perceptual]

Matching is performed with priority given to perceptual.

[Saturation]

Matching is performed with priority given to saturation.

[Colorimetric]

Matching is performed so that color difference between originals and printouts is
minimized.

[Use Grayscale Profile] 

With this check box selected, gray data is converted to CMYK data according to the machine's grayscale

profile.

●

Printing may be performed only with K (black) toner depending on the setting of [Output Profile] or [Use
Pure Black Text].

[Use Pure Black Text] 

With this check box selected, black text is printed with K (black) toner only. Unlike printing with color (CMY)

toner, color toner slurring around the edges will not occur. It is recommended that normally you use this

setting.

[Black Overprint] 

Set how to print when black text is overlapped on a color background or color figure with [Use Pure Black

Text] selected. With this check box selected, first only the color background or figure is printed and then the

black text is printed onto the background or figure with black (K) toner alone. With this check box deselected,

first the data is printed after the black text is cut out from the color background or figure, leaving the

corresponding white blank, and then the black text is printed on the white blank.

●

With  this  check  box  deselected,  the  print  may  be  fainter  or  the  edges  of  the  text  may  be  rimmed  with
white.

[Perfrom Composite Overprinting] 

With this check box selected, CMYK data for which overprint is set will be overprinted as composite data.

●

When [CMYK Simulation Profile] is set to other than [None], overprint is not performed even if this check
box is selected.

Printing a Document

154

Summary of Contents for LBP710Cx































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments