Canon LBP7010C, E-Manual

Page: 315 / 343

019A-084
Perform one of the following solutions according to the cause.
<Cause 1> The toner cartridges are not installed properly.
Solution
Check the installation status of the toner cartridges.
"Replacing the Toner Cartridge"
<Cause 2> Appropriate paper is not being used.
Solution
Replace the paper with that which can be used with this printer.
"Usable Paper"
<Cause 3> The toner cartridges are almost out of toner.
Solution
Check the toner cartridges status and replace the toner cartridges of the colors are nearing the end of
their life.
"Checking the Consumables Status"
"Toner Cartridge Replacement"
<Cause 4> The photosensitive drum of the printer is deteriorated.
Solution
Replace the drum cartridge with a new one.
"Drum Cartridge Replacement"
<About Out-of-Register Colors>
Laser printers are manufactured with technology of high precision. A phenomenon of "Out-of-Register Colors" may be
slightly conspicuous depending on the print image. Please note that this is due to the structure of laser printers and is
not a printer malfunction.
If you mind a phenomenon of "Out-of-Register Colors" during color printing, you may be able to improve the problem by
performing the following procedure in the printer driver.
1. Display the [Finishing] sheet.
2. Click [Advanced Settings].
3. Set [Special Print Mode] to [Special Settings C4].
Normally, use the printer with [Special Print Mode] set to [Off]. Change the settings only if the described problems
occur.
Data Is Not Printed in the Correct Color (Specified Color) Due to "Out-of-
Register Colors"
㻟㻝㻡㻌㻛㻌㻟㻠㻟