Canon LBP6000 Series, Service Manual

Page: 87 / 146

Chapter 3
3-9
F-3-19
3.1.8 Drive Unit
3.1.8.1 Preparation for Removing the Drive Belt
0019-2622
LBP3100 / LBP3010B
1) Removing the Upper Cover
(page 3-3)
Reference[Removing the Upper
Cover]
2) Removing the Left Cover
(page 3-2)
Reference[Removing the Left Cov-
er]
3) Removing the Right Cover
(page 3-2)
Reference[Removing the Right
Cover]
4) Removing the Front Cover
(page 3-6)
Reference[Removing the Front
Cover]
3.1.8.2 Removing the Drive Belt
0019-2623
LBP3100 / LBP3010B
1) Remove the tension unit [1].
- 1 screw [2]
F-3-20
2) Remove the drive cover [1].
- 4 screws [2]
F-3-21
3) Remove the 2 gears [1].
Be sure to place the springs [1] between [A] and [B] parts of the Pickup Tray
Unit when assembling.
When installing the Pickup Tray Unit to the machine, be sure to put the
Pickup Tray [2] onto the Pickup Roller [1].
[1]
[2]
[3]
[1]
[A]
[B]
[1]
[A]
[B]
[1]
[2]
Points to note at disassembly
When removing the 4 screws [1], hold the driver cover [2] by hand.
(Otherwise, the spring [3] inside the drive cover may be lost.)
[1] [2]
[1]
[2]
[3]
[1]
[1] [2] [2]
[2]