background image

Chapter 3  

3-6

3.1.5 Front Cover

3.1.5.1 Preparation for Removing the Front Cover

0019-2203

LBP3100 / LBP3010B

1) Removing the Upper Cover 

(page 3-3)

Reference[Removing the Upper

Cover]

2) Removing the Left Cover 

(page 3-2)

Reference[Removing the Left Cov-

er]

3) Removing the Right Cover 

(page 3-2)

Reference[Removing the Right

Cover]

3.1.5.2 Removing the Front Cover

0019-2204

LBP3100 / LBP3010B

1) Release the 2 hooks in the arrow [A] direction.
2) While releasing the 4 hooks [2] in the arrow [B] direction, remove the

front cover [3].

F-3-12

3.1.5.3 Before Remove the Front Cover

0025-1212

LBP6000 / LBP6000B

1) Remove the Upper Cover. 

(page 3-5)

Reference[Removing the Upper

Cover]

2) Remove the Left Cover. 

(page 3-3)

Reference[Removing the Left Cov-

er]

3) Remove the Right Cover. 

(page 3-2)

Reference[Removing the Right

Cover]

3.1.5.4 Removing the Front Cover

0025-1213

LBP6000 / LBP6000B

 

Points to Note at Installation 

- Be sure to fit the 2 Fixing Pressure Arms (Right and Left) [2] into the 2 
holes (right and left) [1] of the Delivery Tray.
- Be sure to set the Cartridge Lock Arm [4] to the arm unit [3] on the 
Delivery Tray.

[1]

[2]

[1]

[3]

[2]

[4]

 

Points to note at installation

Make sure that the switch arm [1] does not contact with the edge of the plate 
[2] when attaching the cover.

MEMO:

The following shows the 4 hooks [1] and 4 hook holes [2] of the Front 
Cover.

[3]

[B]

[A]

[A]

[1]

[2]

[2]

[1]

Summary of Contents for LBP6000 Series



















































































































































Reviews: