Canon LBP6000 Series, Service Manual, Page: 117 / 146

Chapter 3
3-39
1) Disconnect the connector [1], and free the harness [3] from the Harness
Guide [2].
F-3-124
2) Turn the Fixing Assembly [1] in the direction of the arrow [A] followed
by the arrow [B].
F-3-125
3) Remove the Fixing Upper Guide [1].
- 2 Screws [2]
F-3-126
4) Remove the 2 Pressure Plates [1] (right and left).
- 2 Springs [2]
- 2 Pressure Arms [3]
F-3-127
5) Remove the Fixing Film Unit [1].
F-3-128
3.5.3 Fixing Pressure Roller
3.5.3.1 Preparation for Removing the Fixing Pressure
Roller
0019-4362
LBP3100 / LBP3010B
1) Removing the Upper Cover
(page 3-3)
Reference[Removing the Upper
Cover]
2) Removing the Left Cover
(page 3-2)
Reference[Removing the Left Cov-
er]
3) Removing the Right Cover
(page 3-2)
Reference[Removing the Right
Cover]
4) Removing the Rear Cover
(page 3-1)
Reference[Removing the Rear
Cover]
5) Removing the Main Controller PCB
(page 3-17)
Reference[Removing
the Main Controller PCB]
6) Removing the Fixing Assembly
(page 3-34)
Reference[Removing the
Fixing Assembly]
7) Removing the Fixing Film Unit
(page 3-38)
Reference[Removing the
Fixing Film Unit]
3.5.3.2 Removing the Fixing Pressure Roller
0019-4364
LBP3100 / LBP3010B
1) Remove the fixing pressure roller [1].
- Be sure not to touch the surface [1] of the Fixing Film Unit.
- Do not disassemble the Fixing Film Unit to prevent occurrence of
functionality failure.
[1]
[1] [3] [2]
[1]
[A]
[B]
[2]
[1]
[1]
Do not touch the surface [1] of the fixing pressure roller.
[3]
[3]
[2]
[2]
[1]
[1]
[1]
[1]