Canon LBP312 SERIES User Manual Download Page 681 | Manualshive

Page: 681 / 834

background image

- 61 -

which the executable runs, unless that component itself accompanies
the executable.

    It may happen that this requirement contradicts the license
restrictions of other proprietary libraries that do not normally
accompany the operating system.    Such a contradiction means you cannot
use both them and the Library together in an executable that you
distribute.

    7. You may place library facilities that are a work based on the
Library side-by-side in a single library together with other library
facilities not covered by this License, and distribute such a combined
library, provided that the separate distribution of the work based on
the Library and of the other library facilities is otherwise
permitted, and provided that you do these two things:

        a) Accompany the combined library with a copy of the same work
        based on the Library, uncombined with any other library
        facilities.    This must be distributed under the terms of the
        Sections above.

        b) Give prominent notice with the combined library of the fact
        that part of it is a work based on the Library, and explaining
        where to find the accompanying uncombined form of the same work.

    8. You may not copy, modify, sublicense, link with, or distribute
the Library except as expressly provided under this License.    Any
attempt otherwise to copy, modify, sublicense, link with, or
distribute the Library is void, and will automatically terminate your
rights under this License.    However, parties who have received copies,
or rights, from you under this License will not have their licenses
terminated so long as such parties remain in full compliance.

    9. You are not required to accept this License, since you have not
signed it.    However, nothing else grants you permission to modify or
distribute the Library or its derivative works.    These actions are
prohibited by law if you do not accept this License.    Therefore, by
modifying or distributing the Library (or any work based on the

«
...
679
680
681
682
683
...
»

Summary of Contents for LBP312 SERIES



































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for LBP312 SERIES

Brand: Xerox Pages: 310

KX-MC6040 - Color Laser Multi-Function...

Brand: Panasonic Pages: 24

imageRUNNER 5075

Brand: Canon Pages: 250

Brand: Canon Pages: 542

Brand: QMS Pages: 180

WorkCentre 6400XF

Brand: Xerox Pages: 24

Brand: Oce Pages: 230

Booklet Trimmer-D1

Brand: Oce Pages: 42

Brand: Copystar Pages: 1

Brand: DataCard Pages: 106

Brand: imagistics Pages: 230

3150 - Phaser B/W Laser Printer

Brand: Xerox Pages: 2

Brand: Epson Pages: 4

TRST-A10 SERIES

Brand: Toshiba Pages: 6

Brand: Toshiba Pages: 13

Brand: Toshiba Pages: 6

Brand: Toshiba Pages: 32

TRST-A15 SERIES

Brand: Toshiba Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands