Canon LBP312 SERIES User Manual Download Page 640 | Manualshive

Page: 640 / 834

background image

- 20 -

OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

---- Part 3: Cambridge Broadband Ltd. copyright notice (BSD) -----

Portions of this code are copyright (c) 2001-2003, Cambridge Broadband Ltd.
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:

*    Redistributions of source code must retain the above copyright notice,
      this list of conditions and the following disclaimer.

*    Redistributions in binary form must reproduce the above copyright
      notice, this list of conditions and the following disclaimer in the
      documentation and/or other materials provided with the distribution.

*    The name of Cambridge Broadband Ltd. may not be used to endorse or
      promote products derived from this software without specific prior
      written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER ``AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED.    IN NO EVENT SHALL THE COPYRIGHT HOLDER BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

---- Part 4: Sun Microsystems, Inc. copyright notice (BSD) -----

«
...
638
639
640
641
642
...
»

Summary of Contents for LBP312 SERIES



































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for LBP312 SERIES

Brand: Saxxot Pages: 13

Brand: MEFA Pages: 2

Brand: Kodak Pages: 2

Brand: Xerox Pages: 14

WorkCentre XD Series

Brand: Xerox Pages: 63

Brand: Konica Minolta Pages: 108

Brand: Xiamen Sojet Electronics Pages: 37

Brand: Canon Pages: 1154

Brand: DataMetrics Pages: 35

Brand: DataMetrics Pages: 37

Artisan 810 Series

Brand: Epson Pages: 36

Brand: Epson Pages: 2

Brand: Epson Pages: 68

Artisan 810 Series

Brand: Epson Pages: 2

Artisan 810 Series

Brand: Epson Pages: 76

C11CA40201 - WorkForce 500 Color Inkjet

Brand: Epson Pages: 2

Expression EcoTank ET-3600

Brand: Epson Pages: 202

Expression Home XP-200

Brand: Epson Pages: 185

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands