Canon LBP312 SERIES User Manual Download Page 646 | Manualshive

Page: 646 / 834

background image

- 26 -

  *
  * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
  * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  * PURPOSE ARE DISCLAIMED.    IN NO EVENT SHALL THE OpenSSL PROJECT OR
  * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
  * OF THE POSSIBILITY OF SUCH DAMAGE.
  * ====================================================================
  *
  * This product includes cryptographic software written by Eric Young
  * ([email protected]).    This product includes software written by Tim
  * Hudson ([email protected]).
  *
  */

  Original SSLeay License
  -----------------------

/* Copyright (C) 1995-1998 Eric Young ([email protected])
  * All rights reserved.
  *
  * This package is an SSL implementation written
  * by Eric Young ([email protected]).
  * The implementation was written so as to conform with Netscapes SSL.
  *
  * This library is free for commercial and non-commercial use as long as
  * the following conditions are aheared to.    The following conditions
  * apply to all code found in this distribution, be it the RC4, RSA,
  * lhash, DES, etc., code; not just the SSL code.    The SSL documentation
  * included with this distribution is covered by the same copyright terms
  * except that the holder is Tim Hudson ([email protected]).
  *

«
...
644
645
646
647
648
...
»

Summary of Contents for LBP312 SERIES



































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for LBP312 SERIES

Brand: DataCard Pages: 8

Brand: SPRT Pages: 28

Brand: QMS Pages: 26

imageRUNNER ADVANCE C350iF

Brand: Canon Pages: 102

imageRUNNER ADVANCE C2230

Brand: Canon Pages: 12

Brand: Canon Pages: 598

Brand: imagistics Pages: 57

DiMAGE Scan Elite 5400 II

Brand: Konica Minolta Pages: 38

WorkCentre BookMark 40

Brand: Xerox Pages: 12

Brand: Afinia 3D Pages: 47

Brand: Partner Pages: 81

WorkCentre 7328

Brand: Xerox Pages: 8

Brand: OKIDATA Pages: 44

Phaser 6700V/DX

Brand: Xerox Pages: 162

Brand: FOREVER Pages: 2

N2125N - DocuPrint B/W Laser Printer

Brand: Xerox Pages: 335

Brand: Citizen Pages: 37

Brand: Konica Minolta Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands