manualshive.com logo in svg

Canon LBP-810, User Manual

Share
Download
Canon LBP-810 User Manual Download Page 167

 

Network Adapter: 

AXIS 1610

 

Appendix B

Network Adapter: AXIS 1610

 

153

 

Appendix B

 

Network Adapter: AXIS 1610

 

The optional network adapter, AXIS 1610 is available to use the LBP-810 
in a network.

When the network adapter is connected to the parallel port of the LBP-
810, the printer can connect directly to a network. The network adapter 
and host have a peer-to-peer connection. The client can also be connected 
to the network adapter through a print server.

The network adapter for the LBP-810 printer can also connect to other 
Canon Advanced Printing Technology printer models. It cannot be 
connected to printers that do not have the Canon Advanced Printing
Technology.

Secure the network adapter by snapping the two wire clips (located on the 
printer) into the network adapter.

 

AXIS 1610 is a product of AXIS Communications AB. 

 

For more information, refer to the AXIS web site at http://www.axis.com.

Summary of Contents for LBP-810





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands