Canon LBP-810 User Manual Download Page 113

Page: 113 / 188

Using the Canon

Advanced Printing

Technology

Chapter 3

Using the Canon Advanced Printing Technology

Options Menu

You can select the

Options

menu from the menu bar of the LBP-810

Status Window:

The

Options

menu includes the following selections:

❏

Status Options

—This opens the Status Options dialog box that lets

you change the settings for the Status Window.

❏

Port Setting

—This opens the Port Setting dialog box when the printer

is connected to a local parallel port. This setting is unavailable if the
printer is not connected to a local parallel port, or while printing is in
progress.

❏

Cleaning

—This setting allows you to print pages that clean the

printer’s rollers. This setting is not available while printing is in
progress or when there are errors.

Summary of Contents for LBP-810





























































































































































































Search results

Summary of Contents for LBP-810

Reviews:

Brands by name

Popular brands

Canon LBP-810, User Manual

Search results

Summary of Contents for LBP-810

Reviews:

Brands by name

Popular brands