manualshive.com logo in svg

Canon LBP-810, User Manual

Share
Download
Canon LBP-810 User Manual Download Page 124

110

Using the Canon Advanced Printing Technology

Chapter 3

Messages with Sound

The CAPT comes with sound files that provide spoken versions of 
messages you might get while a document is printing. If you installed the 
sound files and have bi-directional communication and a sound card, the 
CAPT can play these sound messages.

Use the Status Options dialog box in the Options menu to turn sounds on 
or off.

There are two types of audio messages: alert messages and other 
messages. Refer to the following tables, which list the spoken messages, 
the event that triggers each, and the message’s filename.

Information messages

Spoken message

Event

Filename

Printing complete

Last page finished

zdone.wav

Printing paused

Pause button pressed

zpaused.wav

Printing resumed

Printing resumed

zresume.wav

Printing started

Printing started

zstarted.wav

Printing stopped

Delete button pressed

zstopped.wav

Summary of Contents for LBP-810





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands