Canon LBP-3260, Service Manual

Page: 195 / 234

VIII. MAINTENANCE AND SERVICING
A. Periodic Replacement Parts
• No parts require periodic replacement in this printer.
Note: Periodic replacement parts are the parts that must be replaced at regular intervals, even
if they are functioning properly and show no signs of wear. (Failure of these parts can
seriously affect the performance.) These parts should be replaced during a regular
service visit closest to the end of the parts expected life.
B. Expected Service Life of Consumable Parts
Shown below are the average life expectancies (number of prints) of parts that may need to be
replace due to deterioration or damage at least once prior to the elapse of the warranty period
of the printer. These parts should be replace when faulty.
Table 4-8-1
Notes: 1. The values above are only estimates based on part data, and are subject to change.
2. 2 pages are counted as 1 print in case of duplexing. Expected life of the fixing unit
is 350,000 pages when it is used only in the normal mode.
C. Periodic Service
• The printer has no parts that require periodic servicing.
4 - 35
CHAPTER 4
Part No. Remarks
1
2
3
4
5
6
7
8
9
10
Multi-purpose tray pick-
up roller
Separation pad
Fixing unit
Transfer charging roller
Feed roller and separation
roller
Power supply fan
Electrical unit fan
Fixing unit fan
Fixing unit/scanner fan
Multi-purpose tray fan
No. Part name
RB1-9526-000
RF5-2703-000
RG5-4319-000
RF9-1394-000
RF5-1834-000
RH7-1266-000
RH7-1271-000
RH7-1289-000
RH7-1396-000
RH7-1397-000
Replace the multi-purpose
tray pick-up roller and
separation pad together.
220-240V
For both upper and lower rollers.
Replace the feed rollers and
separation rollers together.
Qt’y Expected life
1
1
1
1
4
1
1
1
1
1
200,000 prints
200,000 prints
350,000 pages
(Note 2)
350,000 pages
(Note 2)
350,000 prints
25,000 hours
25,000 hours
25,000 hours
25,000 hours
25,000 hours
As of December, 1998