Canon LBP-3260, Service Manual

Page: 120 / 234

Notes: 1. While replacing parts in the
pick-up unit, to prevent grease
from getting on the pick-up, feed
and separation rollers, be sure
to remove them before working
on the unit. Take care not to get
grease on the paper feed guide.
2. Be sure to grease the parts
shown in figure 3-3-8 when
exchanging, to prevent noise.
The type of grease (do not use
grease other than the specified
type) and the method of applica-
tion is explained below:
Apply about one drop (1mm
diameter) of HY9-0007 to the
contact surface (a) of the roller
holder (1) and shaft (2).
Apply a few drops (total:5mm
diameter) of CK-8009 to 3 or
more continuous cogs of the
parts 3 to 9.
Apply CK-8009 to the whole cog
surface of the lifter (10) thinly.
3 - 10
CHAPTER 3