Canon Ixus 240 hs User Manual Download Page 184

Page: 184 / 220

Printing Images

184

Choose a type of paper.

Touch an option to choose it, and then touch
[Next].

Choose a layout.

Drag up or down to choose an option.

When choosing [N-up], touch

to specify

the number of images per sheet.

Touch [OK].

Print the image.

Choose [ID Photo].

Following steps 1 – 4 on pp. 183 – 18 4,
choose [ID Photo] and touch [Next].

Choose the long and short side
length.

Touch an item to choose it. Touch

choose the length, and then touch
[Trimming].

Available Layout Options

Default

Matches current printer settings.

Bordered

Prints with blank space around the image.

Borderless

Borderless, edge-to-edge printing.

N-up

Choose how many images to print per sheet.

ID Photo

Prints images for identification purposes.
Only available for images with a resolution of L and an aspect ratio of 4:3.

Fixed Size

Choose the print size.
Choose from 3.5 x 5 in., postcard, or wide-format prints.

Printing ID Photos

Summary of Contents for Ixus 240 hs





























































































































































































































Search results

Summary of Contents for Ixus 240 hs

Reviews:

Related manuals for Ixus 240 hs

Brands by name

Popular brands

Canon Ixus 240 hs, User Manual

Search results

Summary of Contents for Ixus 240 hs

Reviews:

Related manuals for Ixus 240 hs

Brands by name

Popular brands