Canon Ixus 240 hs User Manual Download Page 148

Page: 148 / 220

Image Categories

148

You can organize images into categories. Note that images are automatically
categorized at the time of shooting, according to shooting conditions.

: Images with detected faces, or images shot in

mode.

: Images detected as

, or

mode, or images shot in

mode.

Images shot in

mode.

Images shot in

mode.

Choose a category.

Touch

and choose

;

in the menu.

Choose images.

Choose an image after dragging left or right
to browse. Touch the desired category. The
category is now shown in orange.

Touch the category again to cancel selection.
The item is now displayed in white.

Repeat this process to specify other images.

Finish the setup process.

Touch

. A confirmation message is

displayed.

Touch [OK].

•

Images will not be tagged as favorites if you switch to Shooting mode
or turn the camera off before finishing the setup process in step 3.

•

Favorite images will have a three-star rating (

) when transferred

to computers running Windows 7 or Windows Vista. (Does not apply to movies.)

•

Images can also be tagged as favorites by using Touch Actions (p. 149).

Organizing Images by Category (My Category)

IXUS 510 HS

IXUS 240 HS

Summary of Contents for Ixus 240 hs





























































































































































































































Search results

Summary of Contents for Ixus 240 hs

Reviews:

Related manuals for Ixus 240 hs

Brands by name

Popular brands

Canon Ixus 240 hs, User Manual

Search results

Summary of Contents for Ixus 240 hs

Reviews:

Related manuals for Ixus 240 hs

Brands by name

Popular brands