Canon Ixus 240 hs User Manual Download Page 22

Page: 22 / 220

Initial Preparations

Adjust the date and time as follows.

Access the camera menu.

Touch

, and then touch

Choose [Date/Time].

Touch the

tab.

Drag up or down across the screen to choose
[Date/Time].

Touch [Date/Time].

Change the date and time.

Follow step 2 on p. 21 to adjust the settings.

Double-touch

to close the menu.

•

Unless you set the date and time, the [Date/Time] screen will be
displayed each time you turn the camera on. Specify the correct
information.

•

To set daylight saving time (1 hour ahead), touch

and choose

in step 2.

Changing the Date and Time

•

Date/time settings can be retained for about 3 weeks by the camera’s built-in

date/time battery (backup battery) after the battery pack is removed.

•

The date/time battery will be charged in about 4 hours once you insert a charged

battery or connect the camera to an AC adapter kit (sold separately, p. 171),

even if the camera is left off.

•

Once the date/time battery is depleted, the [Date/Time] screen will be displayed

when you turn the camera on. Follow the steps on p. 21 to set the date and time.

Summary of Contents for Ixus 240 hs





























































































































































































































Search results

Summary of Contents for Ixus 240 hs

Reviews:

Related manuals for Ixus 240 hs

Brands by name

Popular brands

Canon Ixus 240 hs, User Manual

Search results

Summary of Contents for Ixus 240 hs

Reviews:

Related manuals for Ixus 240 hs

Brands by name

Popular brands