Canon Ixus 240 hs User Manual Download Page 134

Page: 134 / 220

Viewing

134

To check the focus of your shots, you can magnify the area of the image that
was in the AF frame at the time of shooting.

Access Focus Check.

Touch

(p. 133).

A white frame is displayed where the AF
frame was when the focus was set.

Gray frames are displayed over faces
detected later, in Playback mode.

The portion of the image in the orange frame
is magnified.

Switch frames.

Touch the image in the lower right of the
screen, or move the zoom lever toward

once.

The screen at left is displayed.

To switch to a different frame when there are
multiple frames, touch

Zoom in or out, or view other image
areas.

To zoom in or out, use the zoom lever, touch
the magnified image in the lower right, or
touch

or .

To adjust the display position, drag across
the image in the lower right of the screen.

Touch

or the upper-left image to restore

the original display in step 1.

Checking the Focus

Still Images

Summary of Contents for Ixus 240 hs





























































































































































































































Search results

Summary of Contents for Ixus 240 hs

Reviews:

Related manuals for Ixus 240 hs

Brands by name

Popular brands

Canon Ixus 240 hs, User Manual

Search results

Summary of Contents for Ixus 240 hs

Reviews:

Related manuals for Ixus 240 hs

Brands by name

Popular brands