Canon Ixus 240 hs User Manual Download Page 61

Page: 61 / 220

When distant subjects are too far away to enlarge using the optical zoom, use
digital zoom for up to about 48x enlargement.

When distant subjects are too far away to enlarge using the optical zoom, use
digital zoom for up to about 20x enlargement.

Move the zoom lever toward

Hold the lever until zooming stops.

Zooming stops at the largest possible zoom
factor (where the image is not noticeably
grainy), which is displayed when you release
the zoom lever.

Move the zoom lever toward

again.

To continue magnifying the subject, keep
zooming.

Common, Convenient Features

Zooming In Closer on Subjects (Digital Zoom)

Still Images

Movies

IXUS 510 HS

IXUS 240 HS

Zoom Factor

•

Moving the zoom lever will display the zoom bar (which indicates the
zoom position). The color of the zoom bar will change depending on
the zoom range.

White range: optical zoom range where the image will not appear
grainy.

Yellow range: digital zoom range where the image is not noticeably
grainy (ZoomPlus).

Blue range: digital zoom range where the image will appear grainy.

Because the blue range will not be available at some resolution
settings (p. 76), the maximum zoom factor can be achieved by
following step 1.

Summary of Contents for Ixus 240 hs





























































































































































































































Search results

Summary of Contents for Ixus 240 hs

Reviews:

Related manuals for Ixus 240 hs

Brands by name

Popular brands

Canon Ixus 240 hs, User Manual

Search results

Summary of Contents for Ixus 240 hs

Reviews:

Related manuals for Ixus 240 hs

Brands by name

Popular brands