Canon Ixus 240 hs User Manual Download Page 183

Page: 183 / 220

Printing Images

183

By cropping images before printing, you can print a desired image area
instead of the entire image.

Choose [Trimming].

After following step 1 on p. 182 to access the
printing screen, touch [Trimming].

A cropping frame is now displayed, indicating
the image area to print.

Adjust the cropping frame as
needed.

To resize the frame, move the zoom lever.

To move the frame, drag it.

To rotate the frame, touch

Touch [OK].

Print the image.

Follow step 7 on p. 181 to print.

Choose [Paper Settings].

After following step 1 on p. 182 to access the
printing screen, touch [Paper Settings].

Choose a paper size.

Touch an option to choose it, and then touch
[Next].

Cropping Images Before Printing (Trimming)

•

Cropping may not be possible at small image sizes, or at some
aspect ratios.

•

Dates may not be printed correctly if you crop images shot with [Date
Stamp] selected.

Choosing Paper Size and Layout Before Printing

Summary of Contents for Ixus 240 hs





























































































































































































































Search results

Summary of Contents for Ixus 240 hs

Reviews:

Related manuals for Ixus 240 hs

Brands by name

Popular brands

Canon Ixus 240 hs, User Manual

Search results

Summary of Contents for Ixus 240 hs

Reviews:

Related manuals for Ixus 240 hs

Brands by name

Popular brands