1
Changing the Copy Ratio (Copy Ratio)
1-49
Basic Copying
1
3
Press [Original Size] and enter the original size, and press [Copy Size]
and enter the copy size. Then press [OK].
When entering values in millimetres, you can use
-
(numeric keys) and
.
Place the original on the platen glass if the zoom ratio is more than 200%.
The display returns to the Basic Features screen, and the selected copy ratio is displayed.
If the zoom ratio is less than 25%, a message appears telling you that the ratio will be adjusted to
25%. If it is more than 400%, a message appears telling you that the ratio will be adjusted to 400%.
NOTE
•
You can enter either the width or the length of the original size. Make sure and enter the same
type of measurement for the copy size. (For example, if you enter the width of the original for
[Original Size], enter the width of the copy for [Copy Size].) The machine will automatically
calculate the correct ratio based on your measurements, however, the original image may be
trimmed slightly on the copy depending on the paper size.
•
If you make a mistake when entering values, press [C] on the touch panel display, and enter the
correct values.
•
To specify the sizes of the horizontal direction (X) and the vertical direction (Y) independently,
press [XY Zoom].
•
If you want to enter values in inches, press [Inch]. Set the inch entry function to [On] in the
Additional Functions beforehand. (See “Chapter 3 Selecting and Storing Settings to Suit Your
Needs” in the Reference Guide.)
•
For details on how to enter the values in inches, see “Chapter 1 Before You Start Using This
Machine” in the Reference Guide.
4
Press
.
Copying starts.
NOTE
•
To return the copy ratio to 100%, press [1:1].
•
To cancel this setting, press [Copy Ratio]
→
[Zoom Program]
→
[Cancel] in this order.
•
To cancel all settings and return the machine to the Standard mode, press
.
0
9
C
